![]() I've poked around a bunch but can't find. When I go to Storage Manager, click storage pool, click action, the option to add drive is grayed out. The 4TB drive is initialized and not in a storage pool. Please refer to the following table for the maximum single volume size of different Synology NAS models. Adding a second drive to storage pool, add drive option is grayed out. However, please note that the maximum single volume size is not directly related to the total capacity available in a storage pool. In contrast, if you create a separate pool with the second drive, you will still have the total storage capacity, but without the risk of a total loss should a single drive fail. Only a few models support a maximum single volume size of 200 TB. If you create a 2-drive JBOD, or RAID0, the loss of a single drive will destroy the entire volume. Synology will take care of it for you in the next steps. Your new drive will pop up in the drive pool as Not initialised. In general, Synology NAS models that come with a 32-bit (x86) or 64-bit (圆4) CPU architecture support a maximum single volume size of 16 TB or 108 TB, respectively. Synology - Rebuild Volume Steps On your Diskstation manager (DSM) go to Storage Manager>HDD/SSD. ![]() "Maximum single volume size of Synology NAS You can create a second volume though, but I just want to create single volumes for simplicity. Disk 3 shows initialized, the log file shows bad sectors, however, when I run the SMART test, it shows normal. It is tied to the CPU architecture unfortunately, so I doubt I will continue using the ones I have. My new Synology RS814RP+ (installed around June 25th) running 4 4TB WD Red Hard drives (RAID 10) from Synology's own list of drives has now entered a degraded state. The Synology has a better OS and density for the price point, but not supporting the full drive size is wasteful. That seems to be the path I am going since the platform is CPU restricted to certain volume size, but a storage pool can have multiple volumes. If the DS1821+'s don't get 18tb or larger drive support I will just sell them, and buy more Asustor's. I have been buying Asustor's that now support the 18tb WD drives. Kind of sucks, but I am hopeful they update the firmware to support the larger drives, but I started buying other products that can support the larger drives without issue. It will initialize the storage and volume, but will cap out at the stated spec storage limit of 108TB. Select the new hard drive, and then click the Next button again. In the new window that comes up, select the Repair option, and then hit the Next button. Click the Manage button at the top of the window. I have eight WD Gold 18tb drives per DS1821+ (I have four) with maximum memory and the latest firmware, DSM 7.0-41890. In Storage Manager, click the Volume option in the left-hand sidebar.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |